Page 4.12
Rev D July 2014
4. Controlling the projector
Digital Projection
HIGHlite Cine 260, 1080p 330
User Manual
Notes
To exit from the menus
completely, you may need to
press
up to three times.
Image changes made using
the menus will take effect
immediately.
Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
When the
Aspect Ratio
is set
to
Native
,
Overscan
can only
be set to
Off
or
Crop
Sharpness
•
Press
or
once.
After the first press, the
Sharpness
adjustment bar will appear.
•
Use the
and
keys to adjust the
Sharpness
from 0 to 200:
•
To return to the
Main menu
, press
once.
Noise Reduction
•
Press
or
once.
After the first press, the
Noise reduction
adjustment bar will appear.
•
Use the
and
keys to adjust the
Noise reduction
from 0 to 200:
•
To return to the
Main menu
, press
once.
Overscan
Some television programs are produced based on the assumption that older
television sets may not display the outer edges of the broadcast picture area.
Consequently the edges of the image may be noisy or badly defined. Overscan is
used to compensate for this, by hiding the outer edges of the image.
•
Use the
or
keys to select from:
Off
Crop
blanks a 3% border from the left and right edges of the image
Zoom
increases the horizontal and vertical resolution of the displayed
image by 6%, so that the all four edges fall outside the screen
area
Main menu continued
