DIGITAL-LOGIC MICROSPACE MSEP800, Technical User'S Manual

Page: 94 / 140

DIGITAL-LOGIC AG
MSEP800 Manual V1.0G
94
10.1.8 COM 3 / COM 4 installation / configuration
If the option MSE8xxCON-I is installed you have to configure the additional COM ports as follow.
Bios settings:
C. Motherboard Device Configuration
→ → → →
C. LPC Card devices
→ → → →
Reserve the ISA IRQ you desired for the COMs (J27 -> chapter 12.2.5)
COM 3 / 4 (if available)
You have to install the additional COM ports (Com 3 and COM 4) manually:
The additional UARTs for COM3 and COM4 does not support the Plug’n’play functionality, so they have
to be installed manually.
In the following driver installation a Windows XP Professional SP2 was used, the configuration for Windows
2000 is mostly similar.
2) Press „Next“
1) Get to the system properties and click on „Hard-
ware“ / „Add Hardware Wizzard“
3) Select „Yes, I have already…” and “Next” 4) Select „Add a new hardware device“ and „Next“