DIGITAL-LOGIC MICROSPACE MSEP800, Technical User'S Manual

Page: 9 / 140

DIGITAL-LOGIC AG
MSEP800 Manual V1.0G
9
1.10 For Your Safety
Your new Digital-Logic product was developed and tested carefully to provide all features necessary
to ensure its compliance with electrical safety requirements. It was also designed for a long fault-free
life. However, the life expectancy of your product can be drastically reduced by improper treatment
during unpacking and installation. Therefore, in the interest of your own safety and of the correct op-
eration of your new Digital-Logic product, you are requested to conform with the following guide-
lines.
Warning!
All operations on this device must be carried out by sufficiently skilled personnel only.
Caution, Electric Shock!
Before installing your new Digital-Logic product, always ensure that your mains power is
switched off. This applies also to the installation of piggybacks or peripherials. Serious
electrical shock hazards can exist during all installation, repair and maintenance operations
with this product. Therefore, always unplug the power cable and any other cables which
provide external voltages before performing work.
ESD Sensitive Device!
Electronic boards and their components are sensitive to static electricity. Therefore, care must
be taken during all handling operations and inspections of this product, in order to ensure
product integrity at all times.