DIGITAL-LOGIC AG
MSEP800 Manual V1.0G
70
J8 IDE Interface
Pin
Signal
Pin
Signal
Pin 1
= Reset (active low)
Pin 2
= GND
Pin 3
= D7
Pin 4
= D8
Pin 5
= D6
Pin 6
= D9
Pin 7
= D5
Pin 8
= D10
Pin 9
= D4
Pin 10
= D11
Pin 11
= D3
Pin 12
= D12
Pin 13
= D2
Pin 14
= D13
Pin 15
= D1
Pin 16
= D14
Pin 17
= D0
Pin 18
= D15
Pin 19
= GND
Pin 20
= (keypin) NC
Pin 21
= NC
Pin 22
= GND
Pin 23
= IOW (active low)
Pin 24
= GND
Pin 25
= IOR (active low)
Pin 26
= GND
Pin 27
= IORDY
Pin 28
= ALE / Master-Slave
Pin 29
= DACK
Pin 30
= GND
Pin 31
= IRQ14
Pin 32
= IOCS16 (active low) NC
Pin 33
= ADR1
Pin 34
= NC
Pin 35
= ADR0
Pin 36
= ADR2
Pin 37
= CS0 (active low)
Pin 38
= CS1 (active low)
Pin 39
= LED (active low)
Pin 40
= GND
Pin 41
= VCC Logic
Pin 42
= VCC Motor
Pin 43
= GND
Pin 44
= NC
X2 Header 0.1” DigitalIO and LVDS Interface
Pin
Signal
Pin
Signal
Pin 1
LVDS_A0-
Pin 2
Pin 3
+5Volt Output
Pin 4
GND
Pin 5
LVDS_A1-
Pin 6
Pin 7
LCD BKL (dep. J3)
Pin 8
LCD BKL (dep. J3)
Pin 9
LVDS_A2-
Pin 10
Pin 11
LCD VDD (dep.J2)
Pin 12 LCD VDD (dep J2)
Pin 13
NC
Pin 14 NC
Pin 15
SM-Bus Clock
Pin 16 SM-Bus Data
Pin 17
Analog out 1
Pin 18 NC
Pin 19
LVDS_Clock-
Pin 20 LVD
Pin 21
Power ON/OFF
(activ low)
Pin 22 GND
Pin 23
+ Supply DC Input
Pin 24 + Supply DC Input
Pin 25
Ground
Pin 26 Digital IO 0
Pin 27
Digital IO 1
Pin 28 Digital IO 2
Pin 29
Digital IO 3
Pin 30 Digital IO 4
Pin 31
Digital IO 5
Pin 32 Digital IO 6
Pin 33
Digital IO 7
Pin 34 Digital IO 8
Pin 35
Digital IO 9
Pin 36 Digital IO 10
Pin 37
Digital IO 11
Pin 38 Digital IO 12
Pin 39
Digital IO 13
Pin 40 Digital IO 14
Pin 41
Digital IO 15
Pin 42 Digital IO 16
Pin 43
Digital IO 17
Pin 44 Digital IO 18
Pin 45
Digital IO 19
Pin 46 Digital IO 20
Pin 47
Digital IO 21
Pin 48 Digital IO 22
Pin 49
Digital IO 23
Pin 50 +3.3Volt Supply Output
The Power input voltage on the pin 23/24 may never be in contact of other signals on this connector, otherwise the
product will be destroyed. Do not short the 3.3V or 5V power output. Pin 7/8 are switched highvoltage 5V or 10-30V)
(depending of J3). Pin 11/12 are switched power output (depending of J2) for the LCD panel.
Summary of Contents for MICROSPACE MSEP800
