DIGITAL-LOGIC MICROSPACE MSEP800, Technical User'S Manual

Page: 122 / 140

DIGITAL-LOGIC AG
MSEP800 Manual V1.0G
122
Boot Order
The Boot Order menu allows the alteration of the devices checked for a bootable image. There are six slots
for selecting the order. Use the arrow keys to select the order number and then press enter to cycle through
the options. The options are None, Floppy Disk, USB Floppy Disk, Hard Drive, CD-ROM Drive, USB CD-
ROM Drive, USB Hard Drive/Flash Drive.
15.3 Motherboard
Drive Configuration
The drive configuration screen determines the setup for the Hard drives, Floppy, CD-ROM and Flash
configurations
Hard Drive Configuration:
IDE BIOS Support: Allows the configuration of the IDE channel. The options are Enable or Disable
80-Conductor Cable Sense: Selects the GPIO that is connected to the IDE –PDIAG sense.
The options are GPIO 00-17, None (disabled) , Force to 40-pin conductor cable, Force to
80-pin conductor cable
DMA/UDMA BIOS Support: This enables DMA/UDMA timings. The options are Enable and
Disable
Max mode for Drive 1 or 2 : This enables the transfer mode. The options are Auto, PIO 0-4,
MDMA 0 or 1, and UDMA 0-4.
Floppy configuration: Allows the Floppy to be either Enabled or Disable
CDROM Configuration: Allows the CD-ROM to be either Enabled or Disabled