Digital Guard Dawg iKEY-M, Manual

Page: 14 / 28

7c - Mounting the Primary Proximity Antenna’s
The Proximity Antenna’s read the Transponder key fobs as you approach the vehicle. There are two
Proximity Antenna's and a "Y" harness that the antennas plug into. One antenna is mounted on at the top
of each side of the vehicles windshield. Remove the sticky back tape from the back of each antenna and
place them at the top of both sides of the windshield.
Next, connect the Antennas to "Y" harness, using the long wire of the "Y" harness for the passangers side
antenna and the short wire to the drivers side. Tuck the wire in behind where the headliner meets the
windshield using the foam squares provided to hide the wire and hold in place. Next as before, run the
remaing side of the "Y" harness behind the "A" piller. Start at the top and bring it out the bottom where it
can later in step 14 be plugged into the iKey module.