Digital Guard Dawg iKEY-M, Manual

Page: 22 / 28

Step 14: Finalizing Connections and Mounting System Modules
14a – Final Connections
Now it is time to make all remaining connections to the iKey system module. Use the picture below
to locate and confirm all connectors are plugged into the correct ports and securely locked into place.
There are 4 Module Ports that will have No connectors in them. There are also a set if 5 Module DIP
switches and 2 Jumpers that are preset from the factory and should be left in their default positions.
Be sure and recheck all connections at SJB. Make sure wires are not too tight and pulling on the
connections.