Digital Guard Dawg iKEY-M, Manual

Page: 10 / 28

3c Remove Lower Steering Wheel
Shroud
To release the lower steering wheel
shroud remove the three T20 Torx
screws.
The two front screws are short and
the back screw is long. The back screw
is a bit harder to locate.
Look to the far back of the panel
opening.
3d Remove Metal Knee Panel
The metal Knee Panel is held in place
by 4 bolts. Two 10mm on each side
of the top and two 8mm on each
side of the bottom. Remove bolts
and lift off panel.
3b Remove Plastic Knee Panel
Begin by removing the two 9/32” screws,
(one on each side of panel) (pics 2 & 3).
Next, pull out firmly to release panel.
Note: on the left side of panel there is a
corner piece that slips behind the left side
pillar molding. (pic4). Carefully side the
panel sideways to release.