Digital Guard Dawg iKEY-M, Manual

Page: 15 / 28

Step 8: Mount Immobilizer Bypass Antenna Ring
The 556U and Bypass antenna ring allow your vehicle’s security system to receive an authorization code
without a key being present. You will be mounting the Bypass ring around the ignition switch cylinder
and plugging it into the 556U module. Begin by wrapping the Bypass ring around the lock cylinder in
front of the black part of the cylinder. You will have a small amount of excess bypass ring wire. Use a
zip-tie to secure any excess bypass ring wire. Use another zip-tie to secure the Bypass ring in place. It is
also a good idea to use a small amount of contact adhesive or silocone to perminately secure the ring in
place. Next, Feed the wires from the ring under the dash and secure with a Zip-tie. (* Note the wires on
the ring are delicate; handle carefully being sure not to put strain onto these wires. Plug the Bypass
Antenna connector into the 556U bypass module Lastly, plug in the "C6" connector (5 slot / 3 wire)
from the main wiring harness into the 556U Bypass module. Note: When routing the Antenna or other
wires DO NOT ATTACH TO THE CROSSMENBER UNDER THE STEERING WHEEL.