Digital Guard Dawg iKEY-M, Manual

Page: 25 / 28

Step 15: System Pre-Test
Now it’s time to do a pre-test of the system. We do a pre-test before finalizing the installation of your
Start Button and buttoning up all panels and wires. If anything needs additional attention, it’s better to
catch it now while wire and module access are easy.
15a Connect B12V
Begin by completing the +12V Battery
connection under your hood, from Step 6. Crimp
a “U” connector onto the systems Red power
wire, than attach it to the Battery terminal.
(Pic 1) Parking lights may flash or doors lock or
unlock as system comes on line.
Next, close the hood, trunk and both vehicle doors but LEAVE THE WINDOWS DOWN.
Pick up both Remote Key Fobs and Emergency Backup Cards (Pic 2 & 3) and walk 15’feet away from your
Mustang, set one key fob down. With the remaining Key Fob;
Press buttons: “LOCK”, “UNLOCK”, “LOCK” to sync the iKey system to the vehicle.
Pic 3