Digital Equipment RapidPrint 500, Reference Manual

Page: 51 / 192

Server Configuration
Quick Reference
4 -
1
1
NetWare Server Parameters
To Use This Command Example(s) What Example Does
Change the Internal
Network Number Set/Define Protocols NetWare Inter-
nal
SET PROTOCOLS NETWARE INTERNAL
NETWORK a3cc0850
Changes the preconfigured internal net-
work number to “a3cc0850.”
See Routing and Encapsulation for more
information.
Configure Routing and
Encapsulation 1. Set/Define Protocols NetWare
Encapsulation
SET PROTOCOLS NETWARE
ENCAPSULATION ETHER_II DISABLED
Disables the Ether_II frame type. Unless
explicitly disabled, the Native, 802.2, and
Snap frame types are still enabled.
2. Set/Define Protocols NetWare
Routing
SET PROTOCOLS NETWARE ROUTING
ENABLED
Enables internal routing. If more than one
frame type is enabled, internal routing
must also be enabled.
See Routing and Encapsulation for more
information.
Configure the Rapid-
Print 500 to Query
Access Lists Set/Define Protocols NetWare Access
SET PROTOCOLS NETWARE ACCESS ALL
Scans all fileservers on the network for
queues.
SET PROTOCOLS NETWARE ACCESS
LOCAL
Scans only fileservers on the local net-
work segment for jobs.
See NetWare Access Lists for more infor-
mation.
View the Current and
Saved Access Lists Show/Monitor/List Protocols
SHOW PROTOCOLS NETWARE ACCESS
Shows the current fileserver access list.
See NetWare Access Lists for more infor-
mation.
Rescan All NetWare
Fileservers for Pending
Jobs Set Protocols NetWare Reset
SET PROTOCOLS NETWARE RESET
Immediately rescans the network for new
connections.
See NetWare Access Lists for more infor-
mation.