Digital Equipment RapidPrint 500, Reference Manual, Page: 123 / 192

Command Reference Help
11 - 5
11.8 Help
Lets you access the online Help system. Enter Help with no parameters to see a list of all available
commands.
Restrictions
The help processor only shows the help text for the commands that the
user is privileged to use. To see all help text, become the privileged user.
Parameters command
Gives general information about the command, and lists any parameters.
parameter
Gives more specific information about the command and parameter, and
lists any sub-parameters. Several parameters can be specified, provided
they are listed in the proper hierarchical order.
Examples
Local> HELP DEFINE SERVER BROADCAST
11.9 Initialize Server
Resets the server or cancels a pending Initialization. When reset, the server loses all changes made
using Set commands unless corresponding Define or Save commands were also entered.
NOTE: Initialization options can be used in any order or combination.
Restrictions You must be the privileged user to use this command.
Parameters Cancel
Cancels any impending Initialize command. Cancel and Delay cannot be
used together.
Delay
Schedules the Initialize after a specified number of minutes (the range is
0-120 minutes). Show Server Status will show the time pending until a
scheduled reboot.
Factory
Causes the server to reload the factory settings. In addition to Set configu-
rations, all Saved and Defined settings will be cleared.
NOTE: A Factory Init clears all settings not enabled by default, including NDS and LAT.
After the initialization, you will have to re-enter the LAT license.
HELP command parameter
[ ] [ ]
INITIALIZE SERVER
[ ]
CANCEL
DELAY delay
FACTORY
NOBOOT
RELOAD