Digital Equipment RapidPrint 500, Reference Manual

Page: 2 / 192

ii
October 1996
© Digital Equipment Corporation. All rights reserved. No part of the contents of this book may be trans-
mitted or reproduced in any form or by any means without the written permission of Digital Equipment
Corporation. Printed in the United States of America.
The following are trademarks of Digital Equipment Corporation: Digital, the DIGITAL logo, LAT, ULTRIX,
and VMS.
EtherTalk is a registered trademark of Apple Computer, Inc. HP is a registered trademark of Hewlett-Pack-
ard Company. IBM is a registered trademark of International Business Machines. LaserWriter and
LocalTalk are registered trademarks of Apple Computer, Inc. NetBIOS is a trademark of Micro Computer
Systems, Inc. PostScript is a registered trademark of Adobe Systems Incorporated. SCO is a trademark of
Santa Cruz Operations, Inc. Solaris and Sun are registered trademarks of Sun Microsystems, Inc.
Microsoft, MS-DOS, Windows, and Windows 95 are registered trademarks and Windows NT is a trade-
mark of Microsoft Corporation. UNIX is a registered trademark in the United States and other countries,
licensed exclusively through X/Open Country Ltd.
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against such interfer-
ence when operating in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with this guide, may cause harmful interfer-
ence to radio communications.
Operation of this equipment in a residential area is likely to cause interference in which case the user, at his
or her own expense, will be required to take whatever measures may be required to correct the interfer-
ence.
Warning: Changes or modifications to this device not explicitly approved by Digital Equipment Corpora-
tion will void the user's authority to operate this device.
Cet appareil doit se soumettre avec la section 15 des statuts et règlements de FCC. Le fonctionnement est
subjecté aux conditions suivantes:
1. Cet appareil ne doit pas causer une interférence malfaisante.
2. Cet appareil doît accepter n'importé quelle interférence reìue qui peut causer
une opération indésirable.