Digital Equipment RapidPrint 500, Reference Manual

Page: 161 / 192

Set/Define Service SOJ
11 - 43
11.91 Set/Define Service SOJ
Specifies a string to be sent to the attached device at the start of every access regardless of network
protocol.
Restrictions You must be the privileged user to use this command.
Parameters StartString
Any ASCII characters, or a backslash and two hex digits.
None
Clears any previously-configured string. No string is configured by
default.
Examples
Local>> DEFINE SERVICE myserv SOJ \45
See Also Clear/Purge Service ; Set/Define Service EOJ ; Show/Monitor/List Ser-
vices .
11.92 Set/Define Service TCPport
Specifies a TCP listener socket for this service. TCP connections to the socket are accepted or
rejected based on the availability of the service.
Restrictions You must be the privileged user to use this command.
Parameters portnum
Enter a socket number between 4000 and 4999.
None
Clears any previously-defined TCPport. No TCPport is configured by
default.
NOTE: Either a TCPport or a Telnetport may be configured for a service, but not both.
See Also Clear/Purge Service ; Set/Define Service Telnetport ; Show/Monitor/List
Services ; TCP/Telnet Service Sockets .
SET
DEFINE
 
 
 
SERVICE ServiceName SOJ
StartString
NONE
 
 
 
SET
DEFINE
 
 
 
SERVICES ServiceName TCPPORT
portnum
NONE
 
 
 