Digital Equipment RapidPrint 500, Reference Manual, Page: 121 / 192

Command Reference Clear/Purge Service
11 - 3
11.3 Clear/Purge Service
Removes a defined service from the RapidPrint 500. The login service can not be deleted via the
Clear/Purge commands—you must use the Set/Define Server Incoming command to remove
them.
Restrictions You must be the privileged user to use this command.
Errors Clear Service fails when there are sessions connected to the service or
when there are connect requests in the service’s queue. These conditions
can be eliminated with the
Logout Port and Remove Queue commands.
NOTE: Default services cannot be deleted; they can only be disabled.
Parameters Local
Removes the definitions of all local services.
service
Removes the definition of the specified service.
Examples
Local> CLEAR SERVICE LOCAL
Local> CLEAR SERVICE fileserver
See Also Set/Define Service commands beginning with Set/Define Service Apple-
Talk ; Show/Monitor/List Services ; Creating Services .
11.4 Clear/Purge SNMP
Removes entries from the SNMP security table.
Restrictions You must be the privileged user to use this command.
Parameters All
Removes all table entries.
CommunityName
The only valid community name is public.
Examples
Local> CLEAR SNMP public
See Also Set/Define SNMP ; Show/Monitor/List SNMP ; Simple Network Manage-
ment Protocol (SNMP) .
CLEAR
PURGE
 
 
 
SERVICE
LOCAL
service
 
 
 
CLEAR
PURGE
 
 
 
SNMP
ALL
CommunityName
 
 
 