Digital Equipment RapidPrint 500, Reference Manual, Page: 163 / 192

11 - 45
11.94 Set/Define SNMP
Configures an access mode for SNMP: Read (read access only), Both (read and write access), or
None (no SNMP requests allowed).
Restrictions You must be the privileged user to use this command.
Examples
Local> SET SNMP COMMUNITY public ACCESS BOTH
See Also Clear/Purge SNMP ; Show/Monitor/List SNMP ; Simple Network Manage-
ment Protocol (SNMP) ; SNMP Security .
11.95 Show/Monitor/List Ports
Displays information about the server’s ports. The current port is the default, unless an optional
port designation is specified.Any List on a virtual port will display template port configuration.
Restrictions You must be the privileged user to use the Monitor Ports command.
Secure users cannot Show or List ports other than their own.
Errors Status and Counters parameters are not valid with List. Counters is also
not valid for virtual ports.
Parameters All
Displays information about all ports.
portnum
Displays information about a specified port.
Characteristics
Displays the port’s settings, such as name and group codes.
Counters
Displays communication errors.
Status
Displays the port’s information about the current connection.
Summary
Displays the access type, offered services, and the login status of the port.
Examples
Local> LIST Port ACCESS DYNAMIC SUMMARY
See Also Set/Define Ports commands; Chapter 5 , Ports .
SET
DEFINE
 
 
 
SNMP COMMUNITY PUBLIC ACCESS
BOTH
NONE
READ
 
 
 
 
 
SHOW
MONITOR
LIST
 
 
 
 
 
PORTS
ALL
portnum
CHARACTERISTICS
COUNTERS
STATUS
SUMMARY