Digital Equipment RapidPrint 500, Reference Manual

Page: 165 / 192

11 - 47
NetWare
Displays detailed counters and status messages specific to the NetWare
protocol, including routing and encapsulation information, and packet
transfer counters by packet type.
The Error Reasons field shows error counters in hexadecimal with the
rightmost bit being 0. For example, an Error Reason of 0040 represents
0000 0000 0100 0000 in binary, which means that bit 6 is set. The meaning
of each bit is explained in Table 11-2.
Table 11-2: IPX Error Reasons
Bit Meaning Explanation
0 Received packet for an unknown
IPX protocol. Packet discarded.
1 Received packet for unknown
socket. Packet discarded.
2 Couldn’t attach to print queue on
file server. When a printer is found that needs to be serviced, the Rapid-
Print 500 attaches to the fileserver. If the RapidPrint 500 can-
not attach, it can’t service the queue.
3 Couldn’t connect to a fileserver. If the RapidPrint 500 hears from a fileserver that matches its
own access list, it will try to connect to the fileserver and scan
for print queues. If the connection does not go through, there
may be security or license limit issues.
4 Couldn’t log out of the fileserver. This bit should never be set.
5 The RapidPrint 500 couldn’t get its
server name and password creden-
tials from fileserver during login. Login fails.
6 Fileserver did not accept the Rapid-
Print 500’s server name and pass-
word credentials. If the login password is “access” (the default), the RapidPrint
500 doesn’t send a password. Otherwise, the login password
has to match the print server password on the fileserver.
For example, if the name of the RapidPrint 500 is “BUNDY”
and the login password for BUNDY is “shoes,” then under
PCONSOLE, printserver BUNDY needs to have password
“shoes.”
7 Couldn’t log into the fileserver. Perhaps the login slots are filled.
8 Check membership call failed. While scanning for print queues, the RapidPrint 500 checks
the memberships of various objects; this is not generally a
problem.
9 Couldn’t map user to trustee. This is where the RapidPrint 500 tries to get rights to access
the print queue; login fails.
10 Couldn’t attach to print queue on
fileserver. Same as bit 2.
11 Couldn’t service the print queue or
couldn’t read the job. There is a print job on the fileserver, but the RapidPrint 500
cannot access it.
12 Couldn’t open a file on the file-
server. This is not a serious error.
13 + Unused, should be 0.