manualshive.com logo in svg

Digital Equipment RapidPrint 500, Reference Manual

Share
Download
Digital Equipment RapidPrint 500 Reference Manual Download Page 129

Set/Define Port Bitronics

11 - 11

11.21

Set/Define Port Bitronics

Enables or disables bidirectional parallel port functionality. The attached printer must also sup-
port Bitronics mode.

Parameters

PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers are
specified with integers between 1 and the total number of physical ports.
Lists of ports must be separated by commas. Ranges of ports must be sep-
arated by a dash (-).

NOTE:

In the absence of a PortList or the All parameter, the configuration will affect the
current port only.

Examples

Local> DEFINE PORT 2 BITRONICS ENABLED

See Also

Bitronics Interface

.

11.22

Set/Define Port DSRlogout

When enabled, the port will be logged out when the port’s DSR signal is dropped. This usually
happens only when the attached device is powered off or disconnected. Any open connections
will be closed before logging out.

Restrictions

You must be the privileged user to use this command.

Parameters

PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers are
specified with integers between 1 and the total number of physical ports.
Lists of ports must be separated by commas. Ranges of ports must be sep-
arated by a dash (-).

NOTE:

In the absence of a PortList or the All parameter, the configuration will affect the
current port only.

Errors

When Modem Control is enabled for a port, DSRlogout is also enabled.

See Also

Show/Monitor/List Ports

;

DSRlogout

.

SET

DEFINE

PORT

PortList

ALL

BITRONICS

ENABLED

DISABLED

SET

DEFINE

PORT

PortList

ALL

DSRLOGOUT

ENABLED

DISABLED

Summary of Contents for RapidPrint 500

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands