Digital Equipment RapidPrint 500, Reference Manual

Page: 132 / 192

Set Privileged/Noprivileged
11 - 14
11.27 Set Privileged/Noprivileged
Changes the current port’s privilege status. Only one port on the server can be privileged at any
time. When changing your port to privileged status, you will be queried for the privileged pass-
word. The factory default privileged password is system; this password can be changed with the
Set Server Privileged Password
command. If the password is forgotten, the server can be reset to
factory defaults.
Restrictions To become the privileged user, the user must know the privileged pass-
word. Secure users cannot become privileged.
Parameters Forces the current port to become the privileged port; the previously priv-
ileged port loses the privilege.
Examples
Local> SET NOPRIVILEGED
Password> system (not echoed)
Local> SET PRIVILEGED OVERRIDE
Password> system (not echoed)
See Also Set/Define Server Privileged Password ; Privileged Password .
11.28 Define Protocols AppleTalk
Enables or Disables the AppleTalk protocol on the server, and allows the specification of a zone
other than the default when there is a router and more than one AppleTalk zone is present.
Restrictions You must be the privileged user to use this command.
Errors If the zone specified cannot be confirmed by a router, the command will
fail.
Set does not work with the Enabled/Disabled parameters; they must be
defined.
Parameters ZoneName
Name of the zone to move the RapidPrint 500 into.
Examples
Local> DEFINE PROTOCOL APPLETALK ZONE “AcctZone”
See Also Show/Monitor/List Protocols ; AppleTalk Server Parameters .
SET
PRIVILEGED OVERRIDE
[ ]
NOPRIVELEGED
 
 
 
SET
DEFINE
 
 
 
PROTOCOLS APPLETALK
ENABLED
DISABLED
ZONE ZoneName
 
 
 
 
 