Digital Equipment RapidPrint 500, Reference Manual

Page: 128 / 192

Set Noprivileged
11 - 10
11.19 Set Noprivileged
Removes privileges from the current session. See Set Privileged/Noprivileged .
11.20 Set/Define Port Authorized Groups
Adds (Enabled) or deletes (Disabled) groups from the list of service groups that are accessible to a
port. Use service groups to restrict access to services on a per-port basis; the authorized groups are
the only groups a port can see. When entries are specified without the Enabled/Disabled parame-
ters, they replace the current group list.
Restrictions You must be the privileged user to use this command.
Parameters PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers are
specified with integers between 1 and the total number of physical ports.
Lists of ports must be separated by commas. Ranges of ports must be sep-
arated by a dash (-).
NOTE: In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
All/grouplist
Group numbers range from 0 to 255. They can be listed individually (1, 3,
12) and by range (3-25, 110-112), with individual entries separated by a
comma. The default is group 0 enabled, groups 1-255 disabled.
Examples
Local> SET PORT AUTHORIZED 0,2-5,101
See Also Set Port Groups ; Set/Define Server Service Groups ; Show/Monitor/List
Ports ; Group Numbers .
SET
DEFINE
 
 
 
PORT
PortList
ALL
AUTHORIZED GROUPS
[ ]
ALL
grouplist
 
 
 
ENABLED
DISABLED