Digital Equipment RapidPrint 500, Reference Manual

Page: 151 / 192

Set/Define Server Reload
11 - 33
11.68 Set/Define Server Reload
Specifies when to reload flash. This command serves no purpose on non-flash units.
Restrictions You must be the privileged user to use this command.
Parameters Always
The server will reload flash each time it boots.
Default
The server will only reload flash when told to do so (the default).
See Also Initialize Server Reload ; Reloading Operational Software .
11.69 Set/Define Server Retransmit Limit
Specifies the number of retries attempted if a network message receives no acknowledgment. This
limit may need to be increased on especially noisy or heavily-used networks.
Restrictions You must be the privileged user to use this command.
Parameters RetransLimit
Enter a value between 4 and 100. The default value is 50.
Examples
Local> SET SERVER RETRANSMIT LIMIT 5
See Also Show/Monitor/List Protocols ; Network Timers .
11.70 Set/Define Server Rlogin
Restricts the use of the RLOGIN command from the server to other hosts. If Rlogins are disabled, users
may not RLOGIN to remote hosts, but incoming Rlogin connections are still permitted.
Restrictions You must be the privileged user to use this command.
See Also Show/Monitor/List Server ; Set/Define Server Incoming .
SET
DEFINE
 
 
 
SERVER RELOAD
ALWAYS
DEFAULT
 
 
 
SET
DEFINE
 
 
 
SERVER RETRANSMIT LIMIT
[ ]
RetransLimit
SET
DEFINE
 
 
 
SERVER RLOGIN
ENABLED
DISABLED
 
 
 