Digital Equipment RapidPrint 500, Reference Manual, Page: 167 / 192

11 - 49
11.97 Show/Monitor Queue
Displays the entries in a particular local service’s connect queue, if it exists. Particular sets of
queues or entries can be selected with the parameters.
Restrictions You must be the privileged user to use the Monitor Queue command.
Parameters All
Displays all queue entries, regardless of type.
Node nodename
Displays only connect requests from a specific network node.
Port portnum
Displays the entries that could be serviced by the specified port.
Service servicename
Displays the entries waiting for the specified service.
Examples
Local> SHOW QUEUE Port 2
Local> MONI QUEUE Service lab5
See Also Set/Define Server Queue Limit .
11.98 Show/Monitor/List Server
Displays the global attributes or counters for the server itself, and the software version number
and the time since the last reboot. The Counter fields are described below.
Restrictions
You must be the privileged user to use the Monitor Server command.
Errors
Counters and Status are not valid with List.
Parameters Bootparams
Displays parameters related to rebooting the unit and reloading the soft-
ware file.
Characteristics
Displays the LAT network settings, the IP addresses, the server’s enabled
characteristics, and the local limits (such as password and queue). This is
the default if no parameter is used.
SHOW
MONITOR
 
 
 
QUEUE
ALL
NODE nodename
PORT portnum
SERVICE servicename
 
 
 
 
 
 
 
SHOW
MONITOR
LIST
 
 
 
 
 
SERVER
BOOTPARAMS
CHARACTERISTICS
COUNTERS
STATUS