Digital Equipment RapidPrint 500, Reference Manual

Page: 150 / 192

Set/Define Server Queue Limit
11 - 32
Examples (Shown with the resulting prompts on the next command line)
Local> SET SERVER PROMPT “Port %n:”
Port 1: SET SERVER PROMPT “%p%S_%n%P%%”
Port_2[NoSession]_2>% SET SERVER PROMPT “Lcl_%n>%P”
Lcl_3>>
11.66 Set/Define Server Queue Limit
Limits the number of queue entries for users waiting for a local service. If connect requests come
in after the limit is reached, they will be rejected.
Restrictions You must be the privileged user to use this command.
Parameters limit
A value between zero and 32 (the default). If zero is specified, queueing is
not allowed and only the user with possession of the service may use it.
None
There will be no limit except for the server’s memory constraints.
Examples
Local> DEFINE SERVER QUEUE LIMIT 4
See Also Show/Monitor/List Server ; Show/Monitor Queue .
11.67 Set/Define Server RARP
Enables or disables querying for a RARP host at system boot time.
Restrictions You must be the privileged user to use this command.
See Also Set/Define Server BOOTP ; Editing the Boot Parameters .
SET
DEFINE
 
 
 
SERVER QUEUE LIMIT
[ ]
limit
NONE
 
 
 
SET
DEFINE
 
 
 
SERVER RARP
ENABLED
DISABLED
 
 
 