Digital Equipment RapidPrint 500, Reference Manual

Page: 136 / 192

Set/Define Protocols NetWare Encapsulation
11 - 18
11.37 Set/Define Protocols NetWare Encapsulation
In conjunction with the Set Protocol NetWare Routing command, this command configures
which frame types the RapidPrint 500 will pay attention to. When routing is enabled, all frame
types are enabled; any undesired frame types may then be disabled with this command. When
routing is disabled, all frame types are disabled; the desired single frame type may then be
enabled using this command.
Restrictions
You must be the privileged user to use this command.
Parameters 802_2
The server uses 802.2 frame format with NetWare SAPs.
Ether_II
The server uses Ethernet v2 frame format.
Native
The server uses “native mode” NetWare frame format.
Snap
The server uses 802.2 frame format with SNAP SAPs.
Examples
Local> DEFINE PROTOCOLS NETWARE ENCAPSULATION ETHER_II DIS-
ABLED
See Also
Show/Monitor/List Protocols ; Set/Define Protocols NetWare Routing ;
NetWare Server Parameters .
11.38 Set/Define Protocols NetWare Internal
Sets the internal network number for the server. This number becomes the server’s address when
routing packets between nodes speaking different NetWare frame types. Under normal circum-
stances, the default internal network number should not have to be changed.
Restrictions You must be the privileged user to use this command.
Parameters netnum
A non-zero network number of up to eight hexadecimal digits in length.
Examples
Local>> DEFINE PROTOCOLS NETWARE INTERNAL a3cc0850
See Also Set/Define Protocols NetWare Routing ; Show/Monitor/List Protocols ;
NetWare Server Parameters .
SET
DEFINE
 
 
 
PROTOCOLS NETWARE ENCAPSULATION
802_2
ETHER_II
NATIVE
SNAP  
 
 
 
 
 
 
ENABLED
DISABLED
 
 
 
SET
DEFINE
 
 
 
PROTOCOLS NETWARE INTERNAL [NETWORK] netnum