Digital Equipment LGplus Series, Setup Manual

Page: 91 / 194

4–21
an additional Line Feed code (0A hex) into the data stream. Do not use this
feature if the host computer sends Line Feeds to the printer.
•
CR = CR is the default.
•
CR = CR + LF inserts an extra Line Feed after each Carriage Return.
Auto LF (Line Feed)
This option defines the printer actions when print data is received past the
forms width setting.
•
Enable (the default) performs an automatic carriage return and line feed
when data is received past the forms width.
•
Disable discards any data past the forms width.
Define LF (Line Feed) Code
The Define LF Code option controls the action of the printer when it receives
a Line Feed code (0Ah) from the host computer. If this feature is enabled,
each time the printer receives a Line Feed, it inserts an additional Carriage
Return code (0Dh) into the data stream. This feature can be used in most
installations, but it is required if the host computer does not send Carriage
Returns to the printer.
•
LF = LF (the default)
•
LF = CR + LF adds an extra Carriage Return with each Line Feed.