Digital Equipment LGplus Series, Setup Manual

Page: 86 / 194

4–16
CR (Carriage Return)
The LG CR option controls the action of the printer when it receives a
Carriage Return code (0Dh) from the host computer.
•
CR = CR (the default) No line feed is added to a carriage return.
•
CR = CR + LF. If this feature is enabled, each time the printer receives a
Carriage Return, it inserts an additional Line Feed code (0Ah) into the
data stream. (Do not use this feature if the host computer sends Line
Feeds to the printer with each Carriage Return.)
LF (Line Feed)
The LG LF option controls the action of the printer when it receives a Line
Feed code (0Ah) from the host computer.
•
LF = LF (the default). No Carriage Return is added to a Line feed.
•
LF = CR + LF. Each time the printer receives a Line Feed, it inserts an
additional Carriage Return code (0Dh) into the data stream. This feature
can be used in most installations, but it is required if the host computer
does not send Carriage Returns to the printer.
Unsolicited Rpt.
This option enables or disables Printer Device Status Reports to be sent to
the host when a reportable status or error condition condition has occurred.
For further information on Device Status Reports, refer to the “Printer Status
Requests and Reports” section in the Digital Emulation chapter of the LG
plus
Series (LG) Programmer’s Reference Manual.
NOTE: This option will work properly only if the printer has the serial
interface selected, and the RTS option on the host interface serial
menu is set to True (see page 4–41).
•
No (the default). Disables all unsolicited status reports from the printer.
•
Small. Enables brief unsolicited status reports and sends an extended
status report to the host.
•
Big.
En
ables extended, unsolicited status reports and sends an extended
status report to the host.