Digital Equipment LGplus Series, Setup Manual

Page: 69 / 194

3–21
The Power–Up Configuration
CONFIG. CONTROL
0*
1
2
3
4
5
6
7
8
Load Config. Save Config. Print Config. Delete Config.
Power–up
Config.
Protect
Configs.
* = Factory Default
When you power on the printer for the first time, it loads configuration 0, the
factory default configuration.
If you save a configuration, such as configuration 1, and turn the power off
and then back on, the printer will load the designated power–up
configuration, not the last saved configuration.
For your convenience, you can specify which configuration (0–8) should be
the power–up configuration.
NOTE: When you change from LG to LinePrinter Plus (or from LinePrinter
Plus to LG) as your active emulation, the power–up configuration
is loaded for the new active emulation. (If no power–up
configuration has been defined, the factory default configuration is
loaded as the new active emulation.)