manualshive.com logo in svg

Digital Equipment Digital NetRider, Owner'S Manual

The Digital Equipment Digital NetRider Owner's Manual is a comprehensive guide designed to help users maximize the potential of their device. Packed with step-by-step instructions and detailed illustrations, this manual is available for free download at manualshive.com, ensuring easy access to the information you need to operate your NetRider effectively.

Share
Download
background image

 vii

 Identification String in a Login Procedure Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

KEEPALIVE TIMER Characteristic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Keepalive Timer Default Values  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Keepalive Timer Example  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

MULTICAST TIMER Characteristic  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Multicast Timer Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Changing Multicast Timer Values Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

ACCESS SERVER NAME Characteristic  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
Default Access Server Name  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
 Changing the ACCESS SERVER NAME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

NODE LIMIT Characteristic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Changing the Access Server NODE LIMIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11

Access SERVER NUMBER Characteristic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Access SERVER NUMBER Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
 Changing the Access SERVER NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

PASSCHECK Characteristic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
Changing the PASSCHECK Characteristics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
PASSCHECK Characteristic Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

QUEUE LIMIT Characteristic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
Special QUEUE LIMIT Values  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
 Changing the QUEUE LIMIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

RETRANSMIT LIMIT Characteristic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
RETRANSMIT LIMIT Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
Changing the RETRANSMIT LIMIT Characteristic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

RESPONDER Characteristic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16

Access Server Mapping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16
Datagram Types  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16
Changing the RESPONDER Characteristic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17

Service Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18
Viewing Service Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18
Changing Access Server Service Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18
Changing Service Groups Examples  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18

Summary of Contents for Digital NetRider

























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Digital NetRider

FARONICS DEVICE FILTER MAC Getting Started Manual preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 4
Alphasmart AS 3000 Installation And User Manual preview
AS 3000
Brand: Alphasmart Pages: 4
IBM ZVSE PARALLEL ACCESS Manual preview
ZVSE PARALLEL ACCESS
Brand: IBM Pages: 10
Bosch VIDOS Installation And Operating Manual preview
VIDOS
Brand: Bosch Pages: 40
Bosch Divar Archive Player Operation Manual preview
Divar Archive Player
Brand: Bosch Pages: 10
Bosch MBV-BPRO-40 Operator'S Manual preview
MBV-BPRO-40
Brand: Bosch Pages: 86
Bosch DINION IP 5000 MP Software Manual preview
DINION IP 5000 MP
Brand: Bosch Pages: 112
Motorola Mobility Services Platform 3.3.1 Software Installation Manual preview
Mobility Services Platform 3.3.1
Brand: Motorola Pages: 28
Motorola IDEN COMPANIONPRO User Manual preview
IDEN COMPANIONPRO
Brand: Motorola Pages: 94
Motorola AIR-CB21AG-A-K9 Quick Start Manual preview
AIR-CB21AG-A-K9
Brand: Motorola Pages: 15
Motorola MOTONAV User Manual preview
MOTONAV
Brand: Motorola Pages: 43
Motorola IDEN ORGANIZER User Manual preview
IDEN ORGANIZER
Brand: Motorola Pages: 33
Motorola FREESCALE SEMICONDUCTOR M68EZ328ADS User Manual preview
FREESCALE SEMICONDUCTOR M68EZ328ADS
Brand: Motorola Pages: 65
Motorola Mobility Services Platform 3.2 Software Installation Manual preview
Mobility Services Platform 3.2
Brand: Motorola Pages: 68
Motorola IDEN WIRELESS DATA SERVICES User Manual preview
IDEN WIRELESS DATA SERVICES
Brand: Motorola Pages: 116
Motorola Mobility Services Platform 3.2.1 Installation Manual preview
Mobility Services Platform 3.2.1
Brand: Motorola Pages: 72
Motorola mobile PhoneTools Quick Start Manual preview
mobile PhoneTools
Brand: Motorola Pages: 12
AMIGOPOD AMIGOPOD 0.99.35 Integration Manual preview
AMIGOPOD 0.99.35
Brand: AMIGOPOD Pages: 23

Brands by name

Popular brands

Load more brands