Digital Equipment Digital NetRider, Owner'S Manual

Page: 438 / 536

Defining the Dialer Service
21-10 Managing Dial Services
Example: Show Dialer, Port Security Enabled
In this example, a user on a port with SECURITY enabled would not have access to
the STATUS display since it might provide access to unlisted or sensitive phone
numbers and other information received from the modem.
Local> SHOW DIALER AT_TRADESHOW CHARACTERISTICS
Dial Service: AT_TRADESHOW
Identification: Dial-back from tradeshow
Connections: Enabled
Ports: 1,2,9-14
Phone number: 555-6766
Delay (seconds): 15
Mode: PPP
Username: None
Password: None
Local>
Showing Dialer Service Status
Use the SHOW/LIST/MONITOR DIALER SERVICE service-name STATUS
command to display dialer service status. These commands are similar to the SHOW
SERVICES LOCAL family of commands in usage and syntax.
Example: Show Dialer Status
In following example, port 10 is currently available; the last phone number it dialed
was found to be busy. Ports 9 and 11 are presently in use. Port 13 is actually dialing a
phone number, while port 14 is waiting for a response from the modem. When the
dialer port is initialized prior to making a phone call, the Last Connection Status field
is cleared.