manualshive.com logo in svg

Digital Equipment Digital NetRider, Owner'S Manual

The Digital Equipment Digital NetRider Owner's Manual is a comprehensive guide designed to help users maximize the potential of their device. Packed with step-by-step instructions and detailed illustrations, this manual is available for free download at manualshive.com, ensuring easy access to the information you need to operate your NetRider effectively.

Share
Download
background image

xii  

Establishing a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-18
Response to Momentary Loss of CTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-19
Disconnecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-19

Configuring DTR and DSR Signals  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10-20

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-20
Port Characteristic Effects on the DTR and DSR Signals . . . . . . . . . . . . . . . . . . . . . . . . .  10-20

11  Configuring and Managing Interactive Devices

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-1

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
In This Chapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

Configuring an Interactive Device for LAT Sessions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-3

Configuring an Interactive Device for LAT Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-3
Sample Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4
Configuring LAT Group Codes for Interactive Devices . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-4
Specifying AUTOCONNECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5
Specifying AUTOPROMPT  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6
Specifying the Default Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6
Specifying Failover  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-7
Configuring Port Queuing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-7
Displaying Access Server Queue Entries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-8
SHOW QUEUE ALL Display Example  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-9
Removing Entries from the Access Server Queue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-9
Configuring Port Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-10

Configuring an Interactive Device for Telnet Sessions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-11

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-11
Configuring a Device on Port 6 for Internet Hosts Example . . . . . . . . . . . . . . . . . . . . . . .  11-11
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12

Configuring a Session Management (TD/SMP) Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-13

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13
How to Configure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13
Benefits and Restrictions Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-13
Local Mode Command Restrictions During Session Management . . . . . . . . . . . . . . . . . .  11-14
Logging In with Multisessions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-15

Configuring On-Demand Loading for Asian Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-16

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16
On-Demand Loading Configuration Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-16
Disable Switch Character. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-16

Configuring for Block-Mode Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-17

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-17
Buffer Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-17

Specifying the Telnet Client Session Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-18

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-18

Summary of Contents for Digital NetRider

























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Digital NetRider

Canon PowerShot A410 Software Starter Manual preview
PowerShot A410
Brand: Canon Pages: 106
Barco TouchKit Installation & User Manual preview
TouchKit
Brand: Barco Pages: 31
Canon PowerShot A590 IS Software User'S Manual preview
PowerShot A590 IS
Brand: Canon Pages: 49
Nortel Quality Monitoring Reference Manual preview
Quality Monitoring
Brand: Nortel Pages: 22
Brocade Communications Systems Brocade 8/12c Installation Manual preview
Brocade 8/12c
Brand: Brocade Communications Systems Pages: 47
NEC NECSAM RICHER APPT FINAL2 Manual preview
NECSAM RICHER APPT FINAL2
Brand: NEC Pages: 1
NEC NECAM NEWSREL 070306 Manual preview
NECAM NEWSREL 070306
Brand: NEC Pages: 2
NEC NEC Hiperwall Quick Start Manual preview
NEC Hiperwall
Brand: NEC Pages: 3
NEC N412I - 1 Operation Manual preview
N412I - 1
Brand: NEC Pages: 9
NEC MultiProfiler User Manual preview
MultiProfiler
Brand: NEC Pages: 49
NEC SMB8000 Manual preview
SMB8000
Brand: NEC Pages: 56
NEC NEC Storage PathManager 3.1 User Manual preview
NEC Storage PathManager 3.1
Brand: NEC Pages: 65
NEC MultiSync FP1375X User Manual preview
MultiSync FP1375X
Brand: NEC Pages: 64
NEC MultiSync FP955 User Manual preview
MultiSync FP955
Brand: NEC Pages: 68
beat buddy MANAGER Manager Manual preview
MANAGER
Brand: beat buddy Pages: 33
Oracle Unified Messaging Installation Manual preview
Unified Messaging
Brand: Oracle Pages: 46
Oracle Retail Place 12.2 Installation Manual preview
Retail Place 12.2
Brand: Oracle Pages: 68
Oracle Oracle Web Application Server Installation Manual preview
Oracle Web Application Server
Brand: Oracle Pages: 80

Brands by name

Popular brands

Load more brands