manualshive.com logo in svg

Digital Equipment Digital NetRider, Owner'S Manual

The Digital Equipment Digital NetRider Owner's Manual is a comprehensive guide designed to help users maximize the potential of their device. Packed with step-by-step instructions and detailed illustrations, this manual is available for free download at manualshive.com, ensuring easy access to the information you need to operate your NetRider effectively.

Share
Download
background image

 xv

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2
Configuring a Printer for Access Through a Telnet Listener . . . . . . . . . . . . . . . . . . . . . . . . 13-2
Configuring a Computer for Access Through a Telnet Listener  . . . . . . . . . . . . . . . . . . . . . 13-3
Configuring a Modem for Access Through a Telnet Listener . . . . . . . . . . . . . . . . . . . . . . . 13-3

Configuring a Personal Computer As a Terminal and for Access through a Telnet Listener . . . 13-5

Sample Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-5
Configuring Personal Computer Access to a Printer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-5
Setting User Priority for Devices Using Dynamic Access . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6
Configuring a File Transfer Partner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-7

Configuring a Remote Print Queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-8

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-8
Configuring a TCP/IP Remote Print Queue on an ULTRIX System . . . . . . . . . . . . . . . . . . 13-8
Printer Port Telnet Server Characteristics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-8
Procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-9
Configuring a TCP/IP Remote Print Queue on a UNIX System  . . . . . . . . . . . . . . . . . . . . 13-10

Configuring a Telnet Listener  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-11

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-11

Configuring Telnet Server Session Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-12

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-12
Mapping Event Indications to Keyboard Characters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-12
Specifying Newline Characteristics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13
Specifying Character Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13

Managing Your Access Server As a Telnet Listener Node . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
Displaying Telnet Listeners  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
Displaying Telnet Server Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
Removing a Telnet Listener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-16
Removing One of Many Devices Assigned to a Telnet Listener . . . . . . . . . . . . . . . . . . . . 13-16
Reassigning a Port  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-17

Supplying User Location Data to Telnet Servers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-18

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-18

Configuring a Raw TCP Listener. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-19

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-19
When To Use Raw TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-19
Configuring Raw TCP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-19
Displaying Raw TCP Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-20

14  Configuring LPD Printers

Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1
In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1

LPD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-2

Supported File Types  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-2

Summary of Contents for Digital NetRider

























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Digital NetRider

Canon 70 MC - ZR70MC MiniDV Digital Camcorder Instruction Manual preview
70 MC - ZR70MC MiniDV Digital Camcorder
Brand: Canon Pages: 57
ProfiNet ProfinetCommander User Manual preview
ProfinetCommander
Brand: ProfiNet Pages: 25
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual preview
ExtremeWare 7.0.0
Brand: Extreme Networks Pages: 1598
FARONICS DEEP FREEZER PROFESSIONAL Manual preview
DEEP FREEZER PROFESSIONAL
Brand: FARONICS Pages: 31
F-SECURE ANTI-VIRUS FOR WINDOWS SERVERS 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR WINDOWS SERVERS 9.00
Brand: F-SECURE Pages: 48
Steinberg TOOLS for CMC Installation Manual preview
TOOLS for CMC
Brand: Steinberg Pages: 1
Ulead BURN.NOW 4 User Manual preview
BURN.NOW 4
Brand: Ulead Pages: 58
Red Hat CERTIFICATE 7.3 RELEASE NOTES Release Note preview
CERTIFICATE 7.3 RELEASE NOTES
Brand: Red Hat Pages: 24
Red Hat APPLICATION STACK 2.1 RELEASE Release Note preview
APPLICATION STACK 2.1 RELEASE
Brand: Red Hat Pages: 26
Symantec BACKUP EXEC 11D Quick Installation Manual preview
BACKUP EXEC 11D
Brand: Symantec Pages: 18
Symantec ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S Release Note preview
ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S
Brand: Symantec Pages: 14
Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 Manual preview
ALTIRIS DEPLOYMENT SOLUTION 7.1
Brand: Symantec Pages: 90
GameShark GAME CUBE Instruction Manual preview
GAME CUBE
Brand: GameShark Pages: 16
Intel 512AN_HMW User Manual preview
512AN_HMW
Brand: Intel Pages: 212
FieldServer FS-8700-80 Driver Manual preview
FS-8700-80
Brand: FieldServer Pages: 43
FieldServer FS-8700-47 Driver Manual preview
FS-8700-47
Brand: FieldServer Pages: 51
Darim VideoSpider User Manual preview
VideoSpider
Brand: Darim Pages: 8
Bay Networks Remote Annex User Manual preview
Remote Annex
Brand: Bay Networks Pages: 90

Brands by name

Popular brands

Load more brands