Digital Equipment Digital NetRider, Owner'S Manual

Page: 60 / 536

Defining Menus
3-8 User Interface
Defining Menus
Introduction
This section describes how to define menus and provides examples.
Reference
For complete information about the commands mentioned in this section, refer to the
Network Access Server Command Reference.
Main Menu
Whenever the server has its factory-set default settings, it stores the main menu in
NVRAM. You can display and modify the default menu using the same commands
that you use for any other menu.
You may find it convenient to use the main menu as a starting point and an example
for creating new menus. For example, to create a new menu entitled SERVICES based
on the main menu, enter the following command:
Local> CHANGE MENU SERVICES FROM MAIN
In effect, the command above copies the main menu and gives the copy the name
SERVICES. To modify the menu SERVICES, use the CHANGE MENU command as
shown in the Example: Sample Definition of a Menu Selection in this chapter.