Digital Equipment Digital NetRider, Owner'S Manual

Page: 371 / 536

Configuring and Managing 3270 Terminal Emulation (TN3270) 18-19
Commands to Manage TN3270 Terminal Emulation
Commands to Manage TN3270 Terminal Emulation
Introduction
This section summarizes the commands to manage 3270 emulation.
Reference
For a complete description of these commands and the correct syntax, refer to the
Network Access Server Command Reference.
TN3270 Access Server Characteristics
The following table summarizes the TN3270 commands that configure access server
characteristics:
Command Description Default
SET/DEFINE/
CHANGE TN3270
ATOE Changes the ASCII-
to- EBCDIC
translation for the
code specified. For the default ASCII-
to-EBCDIC translation
table, refer to the
Network Access Server
Command Reference.
SET/DEFINE/
CHANGE TN3270
ETOA Changes the
EBCDIC-to-ASCII
translation for the
code specified. For the default
EBCDIC-to-ASCII
translation table, refer to
the Network Access
Server Commands
Reference.
SET/DEFINE/
CHANGE TN3270
TERMINAL Creates an access
server-wide
customized TN3270
terminal or renames
an existing keymap
for a terminal. For the default
KEYMAP, refer to the
Network Access Server
Command Reference.
CLEAR/PURGE
TN3270 TERMINAL Clears dynamic or
permanent memory of
a customized 3270
terminal. None
SET/DEFINE/
CHANGE TN3270
KEYMAP Customizes
keymappings for an
existing access server-
wide keymap. None