Digital Equipment Digital NetRider, Owner'S Manual

Page: 126 / 536

Configuring a List of Internet ARP Entries
7-18 TCP/IP Network Characteristics
Configuring a List of Internet ARP Entries
Introduction
The list of address resolution protocol (ARP) entries maps Internet addresses to
Ethernet hardware addresses for devices on the same network as the access server. You
only need to enter the network hosts that do not support ARP.
Displaying the List of Internet ARP Entries
To display a list of ARP entries, use the SHOW/LIST/MONITOR INTERNET ARP
ENTRY command.
Sample List of Internet ARP Entries
The following example shows a typical display list of ARP entries:
Local> SHOW INTERNET ARP ENTRY
Internet Address Ethernet Address Status
16.20.0.96 AA-00-04-00-21-10
16.20.0.173 08-00-2B-04-41-9B
16.20.0.96 AA-00-04-00-3B-11
6.20.48.48 AA-00-05-08-3B-20 No Purge
Defining an ARP Entry
To define an ARP entry in the list of entries, use the DEFINE/SET/CHANGE
INTERNET ARP ENTRY command with the ETHERNET parameter.
ARP Entry Definition Example
The following example shows how to enter a definition in the list of ARP entries:
Local> CHANGE INTERNET ARP ENTRY 195.1.1.72 ETHERNET
08-54-56-67-AC-89
This command maps the Internet address of 195.1.1.72 to the Ethernet hardware
address 08-54-56-67-AC-89.