Configuring Your System
AlphaServer 1000 Rackmount Owner's Guide 6-11
Figure 6-4 shows the location of EISA and ISA option slots on the system board. To
access the slots, you will need to remove the top and left panels of the system enclosure.
Be sure to replace the panels before attempting to start the system again.
_________________________ Caution ___________________________
Do not remove the system's top cover when the system is running. If you
remove the top cover without first properly turning off the system, the system
will shut down, with potential loss of data.
____________________________________________________________
Figure 6–4: EISA, ISA, and PCI Open Slots
1
3
MLO-011573
2
1 EISA/ISA option
slots
2 PCI option slots
3 PCI or EISA/ISA
option slot
Note: If the top EISA
option slot is used, the
bottom PCI slot cannot
be used. If the bottom
PCI slot is used, the top
EISA slot cannot be
used.
For information about installing a specific option, refer to the documentation for that
option. For information about configuring an EISA option, refer to the sections, "EISA
Configuration Utility (ECU)" and "Configuring EISA Options," later in this chapter.
