Configuring Your System
AlphaServer 1000 Rackmount Owner's Guide 6-3
SRM Console Configuration Commands
The following console commands are used to verify system configuration on systems
running either the DEC OSF/1 or OpenVMS operating system:
show config
Displays the buses on the system
and the devices found on those
buses.
show device
Displays the devices and
controllers in the system.
show memory
Displays main memory
configuration.
set
and
show
Set and display environment
variables.
The show config Command
The
show config
command displays all devices found on the system bus, PCI bus, and
EISA bus. You can use the information in the display to identify target devices for
commands such as
boot
and
test
, as well as to verify that the system sees all the
devices that are installed.
The configuration display looks similar to that in Example 6–1:
Example 6–1: The show config Command
>>> show config
Digital Equipment Corporation
Alpha AXP (tm) Server
SRM Console X3.3-1476 VMS PALcode X5.48-71, OSF PALcode
X1.35-49
MEMORY
80 Meg of System Memory
Bank 0 = 32 Mbytes(8 MB Per Simm) Starting at 0x00000000
Bank 1 = 32 Mbytes(8 MB Per Simm) Starting at 0x02000000
Bank 2 = 16 Mbytes(4 MB Per Simm) Starting at 0x04000000
Bank 3 = No Memory Detected
