DigiOpG2 Digital Video Recorder for 4-8-16 cameras Page
64
3040-00057
Play-back Window
The green color represents selected area. You can design searching areas
with below buttons to catch up the areas where motion was detected.
This playback window is to play recorded images. You can select either
“Search All” or “Search Next Movement” to playback recorded motion
pictures.
Currently Searched Date and Time
Shows the camera channel information for the recorded
images.
Channel Information
Show the camera channel information for the recorded
images.
Search Area Section
Square
You can freely select searching area in square shape.
Block
You can design the searching area on pixel basis. (16X16 pixel)
Move
You can edit the size and position of the selected area.
Delete
You can cancel the selected area.
Search Option
View Search Process
When you select “View Search process”, you can see all the images
while searching in the playback window. It may take longer search time.
Without the selection, the window playback the recorded images by
motion detection only
Zoom
You can zoom in and out the played images, or playback the recorded
images in either zoom in or zoom out mode.
Sensitiveness
You can set motion sensitiveness from 1 through 100. The bigger
sensitivity number you select, the more sensitive the system will be in
small amount of motion. Normally, put the setting to 100.
Search
Start
To start, you can select the starting time. When you select the [File
Begin] list, it will search for recorded saved file at present regardless the
set up time. To view the beginning of an image before search, set “Start
Time” and press the [Go to start] button. Then, the image will appear.
