DigiOpG2 Digital Video Recorder for 4-8-16 cameras Page
38
3040-00057
Sensor Type
Select the type of sensors to be preset on alarm from the N/C (Normal
Close) or N/O (Normal Open). Only one type can be selected between
the two types.
Recording Mode
When you want to record only the images on sensor-detected camera in
full frame speed instead of the current recording images at the standard
frame rate while the sensor is activated, choose “Optimize Frames Per
Second”. When you want to record both current images and all images
on sensor-detected camera, choose “Normal.”
Note
Optimize Frames Per Second:
Records with the maximum speed of product system, without
bothering about the present setting when Sensor activates.
Normal:
It is more effective to use to operate together with “Security
Mode” without influencing other camera and record whenever
sensor occurs.
Sensor Recording Time
Sets the preset duration for recording time when a sensor is triggered.
Maximum recording time is 5 minutes. When the preset recording time
is up, the recording of images detected by sensors halt and the system
returns to the previous recording mode until the sensor is triggered.
Set Sensor Etc
Display mode freeze after sensor
When a sensor corresponding to a selected camera detects any motion,
the system automatically display the images from the camera for the
duration of the preset “Display Mode Freeze after sensor,” regardless of
the display mode selected. When the recording time is up, users can
manually select either to keep sensor display mode or return to the
original display mode. Click on the current recording screen when you
want to return to original display mode.
Motion Sensor
When the motion sensor is selected, alarm will trigger when the motion
is detected.
Select the sensor and the camera of the image desire to detect when
using the “Motion Sensor.”
Note
“Motion Sensor” may not be supported depending on the
product.
Use No.4 sensor for Auto Shutdown
In case the power supply is discontinued, the Auto-Shutdown functions
and the system shut down safely. The user can set up when the use the
Auto-Shutdown (UPS battery backup time) during the discontinuous of
power supply. Inquire from the place of purchase for the UPS used.
For example, when the UPS battery is set for 1 minute, the system shut
down safely after power supply excess 1 minute.