DigiOpG2 Digital Video Recorder for 4-8-16 cameras Page
12
3040-00057
Power Button
EDNS-4000 is designed to automatically start the operation (Auto-
Rebooting) just after power is supplied. To shut down manually while
operating, the power button must be pressed for at least 1 second. The
monitor displays ‘System Shutdown’ message and shuts down
afterwards. In case of abnormal operation of EDNS-4000, shut down
the power by pressing the button for at least more than 4 seconds.
Then, HDD auto-recovery system operates, restoring back to the
previous state when rebooting
Back Panel
EDNS-4000 - 4 CH/8 CH/16 CH (The picture below is EDNS-4000-16CH.)
No.
Name
No.
Name
1
Power Connection Circuit
9
LAN Port
2
Mouse Port
10
USB Port
3
Keyboard Port
11
Alarm input/output Port
4
Printer Port
12
Spot Monitor Output / RCA Jack
5
PTZ Controller Port / RS-232C
6
PC Monitor Output
7
Speaker Output / Line Out
8
Microphone Input
13
Image Input / D-Sub
EDNS-4000 4 CH: 4ch 1ea
EDNS-4000 8 CH: 8ch 1ea
EDNS-4000 16 CH: 8ch 2ea
Power Connection Circuit
Connect the power cord enclosed.
Note
Before connecting the power, convert the power switch,
AC110V ~ 120V ->115, AC220V~240V->230V, depending on
the power voltage on the power socket.
Mouse Port
Connect the mouse enclosed.
Keyboard Port
Keyboard can be connected (Option).
LAN Port
In case of remote monitoring, connect the LAN cable in the RJ-45 jack
connector.
Network has to be LAN (Local Area Network), Internet, or exclusive line
of TCP/IP basis 10/100BASE-TX Ethernet.
