DigiOpG2 Digital Video Recorder for 4-8-16 cameras Page
42
3040-00057
To use preset camera location,
1.
Select the location to move in preset position.
2.
Move to the location by pressing Preset [Move] button or by
clicking the item of the selected category with the left mouse.
Scan
Rotate the currently memorized camera location in sequence.
Depending on the controller, it might automatically rotate or move.
Exterior Equipment
The exterior equipment icon will not appear when this function is not
supported in the controller. Exterior equipment will work only for the
selected functions in the camera controller.
Camera Power
When the camera’s power is connected to the controller, the power can
be turned on or off from the controller by checking Camera Power.
Aux
When any of the accessories is installed to a camera (such as siren),
choose the number corresponding to the accessory to be used and enter
the desired preset operating time. Then, click on the Aux. Icon. The
selected accessory will operate for the duration of entered preset time
and automatically shut off when the preset operating time expires.
Registered Accessory Information
Register or modify information on each currently installed accessory.
Click on the accessory’s number to view registered information on the
accessory.
Exterior Light
Installing an exterior light can help resume surveillance even at night or
in any dark area. When an exterior light is installed to a camera, choose
the number corresponding to the accessory and enter the desired preset
operating time. Then, click on the Light icon. The exterior light will be
kept on for the duration of entered preset time and automatically shut
off when the preset operating time expires.
Exterior Alarm
When an alarm is installed to a camera, choose the number
corresponding to the accessory and enter the desired preset operating
time. Then, click on the Alarm icon. The alarm will be kept on duration
of entered preset time and automatically shut off when the preset
operating time expires.
Wiper
To operate an installed wiper, press on the Wiper icon.
Pump
To operate an installed pump, press on the Pump icon.
Fan
To operate an installed fan, press on the Fan icon.
Heater
To operate an installed heater, press on the Heater icon.
Note
Actual operations manual of each function may vary
significantly from the manual due to different models and
manufacturers of accessories used. This manual presents the
standard model procedures.
