parameter
Graviter Anemometer
GPS
Computer
Barometro ...................Y
Thermometer ...............Y
UTC/chrono Time.........Y
Voltmeter.....................Y
FAI sector navig. ..........Y
Y
Start pylon navig. .........Y
Y
Other start pylons ........Y
Y
Unit of measure ...........Y
Logger
......................Y
Y
Peak recorder ..............Y
3D flight display...........Y
Y
Polar recorder ..............Y
Y
Open the box and switch on by pressing the
.
1. Keyboardl
2 First steps
1.1 Power On Off
1.2 Normal Long key pressure
1.3 Menu navigation / Setup
/
/
To switch on your Graviter, press the
for at least 5 seconds.
normal
pressure the button must be pressed for less than a second. If not specified,
normal key pressure must be used. In multifunction display mode, the various
values can be selected through the use of the
or
.
Refer to this paragraph when you need to change a parameter or when instructed
to do so. To go to the main menu use long pressure on the
key, at the top of the
display you will see the indicator “menu” and under this the submenu name. To
choose a submenu, press
or
, and confirm your choice with the
key. To
return to the main menu or to exit the main menu, just press . The submenus are:
rec (recorder activation), alti (altimeter settings), nav (navigation settings), peak
(peak recorder settings), link (PC conection), unit (unit of measure settings). Once
you have chosen a submenu, you can see the various parameters by pressing
or
. To change a parameter: press the
key, the value flashes to indicate that
can e cad, press the
/
keys until you reach the desired value and press the
to memorize and exit change mode
NB!!! For safety reasons, it’s not possible to
switch the Graviter off when the logger is active (deactivate the logger first to
switch the Graviter off).
N.B. If you press the
key in the “rec” menu,
you activate the recorder.
The key pressure used on the Graviter influences the functions available. For long
pressure, you must keep the button pressed for more than a second. For
Here we explain how to get the best out of your Graviter
Switch on your VL100
button for at least 4 seconds. After the
Graviter logo appears, you will see a set of 8 characters that can be customized
with your name. You can insert your name from a PC with the VLTools software that
you can download from our website www.digifly.com. To switch the Graviter off,
press the
buttons
key for at least 4 seconds.
Pag.5
