in the setup submenu (in tens of meters or tens of feet. For a description of how to
set this parameter, see the paragraph describing the instrument setup.
The Chrono will be erased automatically by the starting of every recording and by
every valideted Start Pilon waypoint (see par. 4.2). The timer synchronises
automatically to the UTC date and time-table transmitted by the GPS. The time
zone is also considered (menu SET, par. n. 36 UTCO). It is algebraically added at
the UTC hours. The synchronisation occurs every time the GPS acquires a valid
position signal.
. In absence of GPS, to
abjust the Date and Time modify following parameters n.10
(hour), n.11
(minutes), n.12
(day), n.13
(month), n.14
(year) in the setup
submenu.
Remember to set parameter n.36 in the setup menu (as explained above).
Height By Distance On Waypoint
Average Glide Ratio
3.12
Barometer
3.13
Thermometer
3.14
Time UTC/Chrono
This is an additional height by distance parameter used to increase the glide safety
level (param. 37
in the setup submenu in tens of meters or tens of feet for every
km of distance). This value is multipled by the distance (in km) to obtain Height on
Wp that is added to the Waypoint Altitude.
The Average Glide Ratio is continuosly updated during a glide and holded as soon
as a lift is reached.
Is possible to modify the averange rate (in second) in the param. 22
in the
setup submenu.
hwp
effa
To select barometer function on the multifunction display, press
or
.To
recalibrate barometer value, go to the n.9
parameter, submenu setup (in 0,1
mB step); this value is added or subtracted to the actual air pressure.
To set up this function, go to the parameter 9 kbar of setup
submenu. Perssing
, the value starts to flash. Change the value using
or
keys, and press
to memorize the value and set up the function. To come back at
multifunction display, press
key and then press another time
key.
To select on the mulifunction display the thermometer reading press the
or
.
To select on the multifunction display the Time (clock) or the Chrono
(chronometer) press the
or keys. In order to reset the Chrono, when displayed,
press with long pressure the
key.
To activate this function, go to the setup menu and press the arrow keys to select
parameter n.36 UTCO. Press
, the value starts to flash. The value is adjustable
by + or - 12, which indicates the number of hours to be added. Press
or
to
select the desired value, and press
to memorize. To return to the main display,
press
twice.
When the TIME indicator is selected by a long-pressing the
key, you can switch
the time display from HH:MM to MM:SS and vice versa
kbar
BE CAREFUL: the wrong use of this function makes barometric and altimetric
values not so reliable.
hour
min
day
mont
year
keys
keys
Pag.17
CHRONO
TIM E
PRESS
TEM P
