flash
- the recording sample frequency, if the logger is on, switches automatically to the
1 sec. rate
When the multifunction display shows the message “WPOK” and an acoustic
signal sounds, the waypoint has been validated. In which case: the GPS receives a
valid FIX in the FAI cylinder.
The FIX number is set by par. n. 5 NFIX of NAV submenu; the radius of the FAI
cylinder is set by par. n. 4 CFAI of NAV submenu.
: in calculating the distance that defines the position as inside the FAI cylinder,
the GPS error coefficient requested by the competition judge has been considered
(par. n. 6 EGPS of NAV submenu).
- the hang glider symbol, placed in the middle of the direction indicator, end to
flash.
- the multifunction display shows (in real time) the distance to the waypoint in
meters, this is selectable for waypoint by short-pressing the
or
, on the
waypoint name and on the UTC time.
To change the parameter described above, use a long pressure on the
button
which gets you into the menu, and press
or
Press
, to enter the parameter list and select n.3 NEAR by pressing
or
. Press , the
symbol on the top right starts to flash. Press
or
(from 0
to 500 metres) and press . To return to the initial display, press .
To change these settings, use a long pressure on
which takes you to the menu,
and press
or
until you reach the NAV submenu. Pressing
, takes you to the
parameters and pressing
or
will take you to 5 NFIX or n.4 CFAI. Press
, the
symbol will start to flash on the top right of the display. Use
or
to select the
desired value (from 1 to 10 fix/gps for 5 NFIX and from 100 to 1000 metres for
n. 4 CFAI ), and press to memorize. To return to the initial display, press
twice.
To change these settings, use a long pressure on
which takes you to the menu,
and press
or
until you reach the NAV submenu. Pressing
takes you to the
parameters and pressing
or
6 EGPS. Press ,the symbol will
start to flash on the top right of the display. Use
or
to select the desired value
(from 0 to100 metres, ) and press
to memorize. To return to the initial display,
press
twice.
Step 4 - WAYPOINT VALIDATE
N. B.
FAI sector navigation
key
to view the NAV submenu.
to set the desired value,
will take you to n.
Pag.19
WP1
FAI
cylinder
approach.
zone
NEAR
- Sampling rate at 3 sec. with autonomy of 15
hours
- Automatic sampling rate at 1 second in WP
approaching
- Recording of the valid points into the FAI
cylinder
- Visual and acoustic indication of the validated
WP