instrument off and on again for a consecutive recording with autostart.
To cancel all the recordings (flights): go to the peak submenu (without enter in it),
press and hold pressed the
key until hearing a triple sound.
In order to display a flight, select the peak submenu: from the multifunction
display, use a long pressure on
key to enter in the menu, then thanks
or
keys go to PEAK submenu. Pressing
key, you will see recorded value. The screen
shows initially maximum peak values and the date of the last recorded flight. To
display alternatively the minimus and maximus peak values press the
key. To
display alternatively the date and the duration of the flight press the
key.
N.B. When the instrument is setting on feet, all the altitudes are espressed in feet
(example: “2293 ft” = 22 930 ft the maximum peak in that flight).
In order to select a different flight press the
and
keys, flight number is
indicated by the 4th numeric indicator on the top of the display, a bigger number
means a more recent flight. The memory of the peak values recorder holds last
100 flights. When thi
exceeds 19 999 or comes down under -999
the measure will be espressed by ten of meters or by ten of feet and the value flashs
to indicate that you are in this modality. To cancel all the recordings (flights), go to
the PEAK submenu (without enter in it), then press and hold pressed the
key,
until hearing a triple sound.
The new flight data recording system records this data: barometric altimeter
altitude, variometer’s value, anemometrical velocity, magnet compass degrees
(Heading), time utc
The frequency of sample is settable via
parameter n. 34
of SET submenu. In order to set the frequency: from the
multifunction display, use a long pression on
key to enter in the menu, then
press
or
keys to go to SET submenu. Press the
key to enter in the submenu,
then thanks to
or
keys go to the parameter 34
(settable from 1 to 60
seconds and initially setted on the value 2). Pressing
, the value will be flashing.
Thanks to
or
keys, choose the value you want, then press
key to memorize
the value. To come back at multifunction display, press
key and then press
another time
key. When you enter the FAI sector, it automatically increases to
once a second and returns to the original value once you’ve convalidated to
waypoint. The memory can hold several flights at the same time up to a maximum
of
6.2 Peak recorder
- ground speed - aircraft speed (Lat/Lon) - waypoint name
received from the GPS (WP of goto/route).
18.000 recordings.
6.3 Multiflights 3D logger
RECR
RECR
Ex.: 15 hrs registration with a 3 second frequency, 300 hrs
with a 60 second frequency.
s altitude value
N.B.: If during of flight is higher than available memory, the recording system
deletes all data of previous flights. Multiflights 3D Logger will contains the data of
last flight only; instead of Peaks Recorder will contains the values of previous
flights too.
Pag.27
