value will start to flash, to change the value press
to choose a value
between 1 and 10, and press
the value will
start to flash, to change the value press
and choose a value between 0 and
100 km/h. Now go to parameter 19 SLF 2 and repeat the procedure.
or
to memorize the value.
- SPEED TO FLY SETTING (parameter 18/19 stf 1/2) changing this setting affects
the STF function shown by the double arrows on the display. Changing this value
tells the instrument what value the double arrows have in km/h. We can set the first
value, (default is 3), so that if we see a small arrow on the screen, we know we have
to accelerate by 3 km/h if it shows up at the top or slow down by 3 km/h if it shows
up at the bottom. The same can be said about the larger arrow, (default 10 km/h).
To change this setting, go to the 18 SLF 1 parameter and press
o
Please remember
while setting this
value, to take into
account not only the
speed range of your
aircraft,but also the
fact that this serves to
optimize the best
glide at a certain
point in time, so it
should be set around
the best glide speed
rather than the actual
speed range of the
aircraft.
Final glide calculator (GOTO)
This function allows you to optimize your flight and get the best performance, You
can use it on final glide or to get to any particular point.
As you can see from the previous page, the final glide calculator shows the
estimated height at which we’ll reach a waypoint (GOTO value) basxed on the
following values: Altimeter Al, distance to waypoint, height at wp, height for km to
distance to wp, average efficiency (best glide). So, for accurate calculations, you
have to set up two important parameters:
Pag.8
