DigiDesign Control 24, Manual

Page: 98 / 159

Control|24 Guide 88
To make the same input assignment to all
channels simultaneously:
■
Press APPLY TO ALL CHANNELS or
OPT(ALT)/ALL while confirming your selection.
Using the above procedure to select “none” (in-
dicated by “–” in the scribble strip) is a quick
and easy way to remove the input settings on all
tracks.
To make the same input assignment to selected
channels only:
■
Press APPLY TO ALL SELECTED CHANNELS or
OPT(ALT)/ALL+SHIFT/ADD while performing
step 4 above.
Assigning Inputs in Sessions with
Multiple Plug-In Outputs
In sessions with plug-ins that have multiple out-
puts, the outputs of those plug-ins are available
as inputs in other audio and Auxiliary Input
tracks. These appear as a third category of in-
puts, labelled
plug-ins .
To assign an input from a plug-in output:
1
Press the ASSIGN switch in the Assignment
section.
2
Press the INPUT switch.
3
Turn the encoder knob on an audio or Auxil-
iary Input track to display the plug-in output
you want to select as an input. (Plug-in outputs
appear after Interface and Bus inputs in the list.)
4
Press the flashing ASSIGN switch to confirm
the assignment.
Displaying Input Assignments:
You can easily check input or output assignment
at any time.
When viewing input, output, or insert routing,
the currently selected assignments will be indi-
cated by a “>“symbol in front of the assignment
name.
To temporarily display input assignment:
■
Press INPUT. The currently assigned input set-
tings will be displayed in each channel’s scribble
strip for as long as you press INPUT.
Assigning Outputs
To assign an audio channel output:
1
Press the ASSIGN switch in the Assignment
section.
2
Press the OUTPUT switch.
3
Turn the encoder knob to scroll through the
list of outputs.
4
Press the flashing switch directly below the
data encoder knob to confirm your selection.
5
Adjust the data encoder knobs on any other
tracks for which you would like to make output
assignments. Press the flashing switches directly
below the data encoder knobs to confirm any
other choices.
6
Press ASSIGN or ESC/CANCEL to leave Output
Assignment mode.
Your output selections will not be saved if you
press the ESC/CANCEL switch without first con-
firming your selections by pressing either the
master ASSIGN switch or the flashing switch di-
rectly below the data encoder knob on each se-
lected track.