DigiDesign Control 24, Manual

Page: 90 / 159

Control|24 Guide 80
To select and adjust the selections OUT point:
■
While pressing the NEXT switch, rotate the
Scrub/Shuttle wheel.
You can move the entire selection forward or
backwards against the Pro Tools timeline while
maintaining the selection length.
To move an entire selection while maintaining it’s
length:
■
Press NEXT+PREVIOUS while rotating the
Scrub/Shuttle wheel in either direction.
To move the selection to also include the previous
track:
■
Press SHIFT/ADD+UP.
To move the selection to also include the following
track:
■
Press SHIFT/ADD+DOWN.
Link/Unlink Edit and Timeline
To link or unlink the Edit and Timeline selections
from Control|24:
■
While pressing SHIFT/ADD, press slash (/) on
the numeric keypad.
Window Navigation Key
Commands
The following key commands are active in all
three of the modes (NAV, ZOOM, and SEL ADJ):
(CTL)+PREVIOUS
= page left 1 page (equiva-
lent to Option-page-up).
(CTL)+NEXT
= page right 1 page (equivalent to
Option-page-down).
(CTL)+UP
= page up 1 page (equivalent to
page-up).
(CTL)+DOWN
= page down 1 page (equivalent
to page-down).
(CTL)+OPT(ALT) ALL+PREVIOUS
= page left all
the way (equivalent to option-home).
(CTL)+OPT(ALT) ALL+NEXT
= page right all the
way (equivalent to option-end).
(CTL)+OPT(ALT) ALL+UP
= page up all the way
(equivalent to home).
(CTL)+OPT(ALT) ALL+DOWN
= page down all
the way (equivalent to end).