manualshive.com logo in svg

DigiDesign Control 24, Manual

Share
Download
DigiDesign Control 24 Manual Download Page 145

Appendix B: Utility Functions

135

Timecode Display Test Mode

Timecode display test mode will continually cy-
cle through a series of automated tests which 
check the LEDs and LED segments on the time 
display located on the meter bridge of Con-
trol|24. 

When “time code” display test mode is 
engaged:

• The encoder switch LED located below the 

scribble strip which shows “Timecode” will 
light solid indicating that this is the chosen 
test mode.

• All other display test menu items shown on 

the scribble strips as well as their associated 
flashing encoder switch LEDs, will remain vis-
ible in this test mode. This allows you to select 
another display test mode without the need 
to first “Exit” this mode.

• Press the flashing encoder switch located be-

low the scribble strip showing another test 
mode to simultaneously disengage the time-
code display test mode and enter the newly 
selected mode. The encoder switch LED for 
the new choice will light solid while the other 
choices flash.

• When finished, press EXIT.

Scribble Strip Test Mode

Scribble strip test mode will continually cycle 
through a series of automated tests which check 
the segments on the LCD scribble strips. 

When “Scribble” test mode is engaged:

• The encoder switch LED located below the 

scribble strip which shows “Scribble” will 
light solid indicating that this is the chosen 
test mode.

• All other display test menu items shown on 

the scribble strips as well as their associated 
flashing encoder switch LEDs, will remain vis-
ible in this test mode. This allows you to select 
another display test mode without the need 
to first “Exit” this mode.

• Press the flashing encoder switch located be-

low the scribble strip showing another test 
mode to simultaneously disengage the scrib-
ble display test mode and enter the newly se-
lected mode. The encoder switch LED for the 
new choice will light solid while the other 
choices flash.

• When finished, press EXIT.

Summary of Contents for Control 24
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands