DigiDesign Control 24, Manual

Page: 80 / 159

Control|24 Guide 70
To paste copied settings to the current Target
plug-in:
1
Select the plug-in into which you want to
paste settings. This must be the same plug-in
that you copied from, on a different track or in-
sert position.
2
Press PASTE SETTING TO CHANNEL.
The GROUPS Section
The GROUPS section contains five Group
switches—CREATE, ENABLE, EDIT, DELETE,
and SUSPEND.
These switches mirror Pro Tools Group menu
commands, enabling you to use Control|24 to
perform all the following Pro Tools Group func-
tions:
• Create new groups, and query current groups
to see if the selected channels are resident in
any existing groups.
• Enable and disable groups.
• Edit groups by adding or removing channels.
• Delete individual or all groups.
• Suspending all group activity.
Creating New Groups
The CREATE switch is used to create groups in
empty group locations, or overwrite existing
groups:
To create groups:
1
Make a selection of two or more channels.
2
Press CREATE. The following occurs:
• The scribble strips briefly display the fol-
lowing message: “Press an encoder switch
to create a new group.”
• This message is replaced by the names of
any existing groups, if the selected group
contains any existing members, along with
the remaining sequence of available letters
of the alphabet.
• Each group name or available letter is dis-
played on its own scribble strip.
3
Press an encoder switch to choose a new letter.
To overwrite an existing group, press that
group’s name.
4
Press ENTER to confirm the new group or that
you want to overwrite the existing group. Press
ESCAPE to exit the group create process without
overwriting.
5
Type the new group name on your alpha-nu-
meric keypad (or just press ENTER to use default
name) and press ENTER (to confirm the new
name and group) or press ESCAPE to cancel.
You can create a new name from the Con-
trol|24 numeric keypad, while never leaving
the control surface for the entire process of
creating and naming a new group. The lim-
itation is that the new groups’s name could
only consist of numbers, and the basic sym-
bols (.+/*– +) provided on the keypad.