Digi TransPort WR11, User Manual

Page: 83 / 866

Hardware TransPort WR44 / WR44 R hardware
Digi TransPort WR Routers User Guide 83
Maximum power and frequency bands
Industry Canada (IC) certifications
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites
applicables aux appareils numeriques de la class B prescrites dans le Reglement sur le brouillage
radioelectrique edicte par le ministere des Communications du Canada.
Safety notices
1 Please read all instructions before installing and powering the router. You should keep these
instructions in a safe place for future reference.
2 If the power supply shows signs of damage or malfunction, stop using it immediately, turn off
the power and disconnect the power supply before contacting your supplier for a repair or
replacement.
3 Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. Use only the accessories, attachments, and
power supplies provided by the manufacturer-connecting non-approved antennas or power
supplies may damage the router, cause interference or create an electric shock hazard, and will
void the warranty.
4 Do not attempt to repair the product. The router contains no electronic components that can be
serviced or replaced by the user. Any attempt to service or repair the router by the user will void
the product warranty.
5 TransPort WR44 devices except for the WR44 R are designed for indoor use. Use them in an
environment suitable for computers and other electronic equipment.
6 Ports that are capable of connecting to other apparatus are defined as SELV ports. To ensure
conformity with IEC60950 ensure that these ports are only connected to ports of the same type
on other apparatus.
Max power Frequencies
2 W
Cellular 850 and 900 MHz bands
1 W
Cellular 1800 and 1900 MHz bands
200 mW
13 overlapping channels, each 22 or 40 MHz wide and spaced
at 5 MHz. Centered at 2.412 to 2.472 MHz.
251.19 mW 165 overlapping channels, each 22 or 40 or 80 MHz wide and
spaced at 5 MHz. Centered at 5180 to 5825 MHz.